This is my personal take on the Lack 3D Printer Enclosure, it is constantly evolving but at present is a MK3 MMUv2 enclosure on top and MK2.5 on the bottom.

From an initial idea of the cabinet I have faced some hurdles that I have solutions for bellow.

What parts to get and print. Assemble with preferred fasteners, I used ZINC plated countersunk and button heads where needed.

• 3 x Lack 550mm x 550mm coffee tables
• 1 x 1200mm x 550mm 6mm plywood for back of cabinet
• 1 x 550mm x 550mm 19mm plywood for base to attach casters to
• 4 x 75mm caster of chocie
• 6 x 6mm x 447mm x 525mm Acrylic with .DXF cutting with CNC/Laser

Each of the 6 panels have M3x5mm ZINC button head bolts tapped into the top corners 1" down.

6mmD x 10mmL Neodymium magnet cylinders get installed in corresponding top of Lack legs so they align when panels are mounted.

2 of which you then could have laser etched with design attached for front panels

• 8 x 3D Printed Leg Extensions attached with your your choice of faster to table and leg
• 2 x Door Hooks to store doors when either printing PLA or doing maintenance
• 1 x AC Shielding parts set if you have any exposed AC on rear (ie. SSRs, RCBO 5v PSU)

List of accessories/upgrades

• Cam Mount with Cable Snake

https://www.thingiverse.com/thing:3129741

• RasPi Frame Mounts MK2.5/MK3

https://www.thingiverse.com/thing:2943918 MK2/MK2.5 https://www.thingiverse.com/thing:2941913 MK3

• MMUv2 Backfeed Containment

https://www.thingiverse.com/thing:3128344

• Lighting with Cabinet RasPi controller

(STILL WRITING ARTICLE)

• Solid State Relay control of printers on Cabinet RasPi controller

(STILL WRITING ARTICLE)

Print Settings

Printer Brand:

Prusa

Printer:

Rafts:

No

Supports:

Resolution:

0.2mm

Infill:

Filament: eSun ABS/ABS+

Category: 3D Printer Accessories