Printbed scraper, Glue scraper, three-sided
TOVA
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
1
2
0
Publicado:2025-12-02 11:41:23
5
4
120Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Three-Sided Square Scraper — Printbed Scraper
🧩 Design Concept & Use
A compact multi-edge scraper that gives you several usable edges in a single print. Ideal for removing 3D prints from the bed, and equally handy as a plastic scraper/spatula for everyday tasks and DIY projects where a metal tool would be too harsh.
The handle side features a chamfered bottom edge so the tool pops off the build plate easily after printing.
🖨️ Printing Tips
Orientation: Flat on the bed, handle up.
Supports: Not required.
Adhesion: PEI (smooth or textured); add a light glue stick if needed.
After printing, lightly deburr the working edges for a cleaner feel.
🛠️ Recommended Settings
Material: PETG or ABS for durability. (PLA is possible but will wear faster.)
First layer: 0.24 mm
Next layers: 0.12 mm (smoother finish & a touch more flex) – 0.20 mm (faster print, more stiffness)
Bottom layers: 5
Walls / perimeters: 5
Top/Bottom pattern: Concentric
Perimeter generator: Arachne walls building engine (if supported by your slicer)
Optional: enable ironing on the topmost surface for a cleaner finish
🧰 Assembly
None — prints as a single piece, ready to use.
☕ Support & Follow
If you like my designs, follow me — more functional everyday prints are coming soon, including tool organizers, workshop helpers, and printable accessories.
You can buy me a coffee simply by printing and boosting my files — nothing more 😉
Most of my uploads are completely free, so I’ll be truly happy if you decide to reward my work in any way.
If you’re interested in commercial use of this model, please contact me by leaving a comment.
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC BY