This is a display mount for the Raspberry pi 400, NO GLUE NEEDED. The display used is https://it.aliexpress.com/item/32889591361.html?spm=a2g0o.productlist.0.0.3d941ca5MjS6cr&algo_pvid=e8399aec-afdb-4f55-b315-c0486bd84d71&algo_exp_id=e8399aec-afdb-4f55-b315-c0486bd84d71-8&pdp_ext_f=%7B%22sku_id%22%3A%2265675398319%22%7D&pdp_npi=2%40dis%21EUR%2118.18%2118.18%21%21%21%21%21%400b0a119a16647218846693034ef1a0%2165675398319%21sea&curPageLogUid=dPYMfjdMCUhq.
The hdmi board used is https://it.aliexpress.com/item/32807649666.html?spm=a2g0o.productlist.0.0.76c93f508ZfIBd&algo_pvid=366e0e47-4503-41bc-bdb0-c780fa5daff6&algo_exp_id=366e0e47-4503-41bc-bdb0-c780fa5daff6-5&pdp_ext_f=%7B%22sku_id%22%3A%2212000025609430420%22%7D&pdp_npi=2%40dis%21EUR%219.77%219.28%21%21%216.26%21%21%400b0a119a16647218976743130ef1a0%2112000025609430420%21sea&curPageLogUid=TMJcKBMKw3Om. To assemle it use the reference image. To assemble it are required 2 M5 screw with nuts (To mount the lcd assembly to the body of the raspberry pi) and 2 M4 screw with nuts (To mount the 2 lateral pieces to the back piece), also some pieces may need to be sanded down to fit correctly. The front piece of can be glued to the two lateral pices.
Also M3 screw and M4 screw with nusts are needed to assemble the display pieces.

If you want you can only print the parts that mount on the Raspberry and adapt yours display to the design.

Anycubic

Large Size Chiron

No

Yes

0.2-0.3

20%