This is a simple wallmount designed to fit Kleenex boxes and 2-3 screws are used to attach it.

Note

• Designed for #6 wood screws, up to (7.25mm head, 3.3mm shaft, 80°)
• The internal dimensions are 230mm x 122mm x 95mm, designed to fit standard kleenex boxes with some extra space
• If you have spaghetti detection of some form, it tends not to like these large hex patterned models.

Printing Recommendations

• Can be printed without supports or brim
• Possible problems with stringing if your filament is wet
  • Recommend using a heat gun to remove strings