This week my child received a small dog-shaped lamp as a gift, but it didn't last long (he broke it quickly xD) so I decided to replicate the design so I could print it as many times as necessary, in addition to being able to personalize it with the filaments that he wish

MY SETTINGS TO PRINT THIS ON MY KP3S 3.0 STOCK(NO MODDED PRINTER)

printed on 0.4mm nozzle
initial layer height 0.20
layer height 0.16
line width 0.44
2 walls
3 bottom layers
3 top layers
5% gyroid filling
overlap percentage 30%
(only use supports on the head piece, at a 65% angle)
speed 60
exterior wall speed 30
interior wall speed 30

For the light I used a LED light, with two small batteries (button style) LR1130, any diode for electronic projects should work.

If you liked this model and want to support me, you can visit buymeacoffe and make any donation ;)

https://www.buymeacoffee.com/XYZMONKEYCUSTOMS