A few finial designs that can be used for tree or window ornaments, desk art, overhead light/fan pull.

Four basic designs, two with a middle support (files with the word “strut” in the filename), and two without a center support.  The included MK3S files are for 101.6mm tall, and the models with …"127mm"… in the filename are for 127mm tall version.  The .gcode files without “strut” in the filename, with no permanent center support, have breakaway support included in the .gcode file.

You can also scale as you want, keeping in mind that the hanger attachment holes will change.  Pulls should probably be printed with 30-50@ infill.  The .gcode files here are only 10% infill.   

The samples shown here were printed using Prusament PLA.  .2mm quality settings, modified for a middle support or not.  .2 separation if no middle support.  .Gcode for no support has breakaway support included.  If you scale you will have to set up your own support for no center strut types.

There are two holes to add a wire, pipe cleaner or thread hook if used for hanging.