Needed some sanding sticks for my prints and couldn't find some that worked so of course just had to make some. One uses a 3/8 sanding belt and the other 3 you can use double sided tape. I included the links down below for what I used. The other 3 have different tips for your sanding needs.

This STL is not to be sold or distributed without authors consent.

Here are the 3/8 belt to use on the one with tabs. I made it a tiny bit longer to make it a tight fit. You may have to shave a bit off to fit it nice and tight.

https://www.amazon.com/dp/B07S75YMF9?_encoding=UTF8&psc=1&ref_=cm_sw_r_cp_ud_dp_N3HBSFK3YZGFWYEQ0F4H

For the adhesive sanding sticks I used tis double stick tape. A bit pricey but it will work very well and you can always implement it into some 3D models.

https://a.co/d/bKyQVB1