I couldnt find a hydro planter anywhere near me so i made my own. I ordered glass vases that are about 140mm in radius and they have different lengths. So i made the model configurable for anyone that needs to scale or stretch the baskets

Print the top mount and basket separately with any material you desire and because its just an indoor model. I have designed the model to be support less. Basket needs to be printed with the mesh on the print bed

After you are done, superglue the top mount and bottom basket together. If the basket dimensions are not to your liking you will see a little lip inside that i made room for a printed spacer that you can slot in to decrease the diameter

WARNING, check your retraction settings. On my ender 2 i used 3mm retraction on the bottom basket. Anything above or below that ate through my filament. So maybe print the jointer mesh first to ensure the retraction wont eat through your filament