Halbach Effect Motor / Generator
Silver Sketch
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2025-12-06 20:43:20
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Halbach-effect motor/generator, designed for 5x5x25mm magnets to work within the confines of a 100mm wheel axle (e.g. scooter wheels).
Note: Not tested; no idea if the thing will work at all.
https://en.wikipedia.org/wiki/Halbach\_array
Inspired by thing:1693579 and thing:2635188, but with OpenSCAD code so that things can be customised.
For a disc version of this, see Halbach Disc Motor Electric Scooter
Post-Printing
Construction
- Print two copies of halbach\_motor\_magnetHolder.stl and halbach\_motor\_wireHolder.stl Flip over and join parts using M5 bolts Glue magnets into the magnet holder in a Halbach array configuration Thread coated wire around the wire holder, skipping 3 spaces with the wire facing into the magnets in an alternating over/under orientation (i.e. serpentine coil) Thread two more coils in the same way in the remaining gaps ...? Enjoy
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC-BY