Description

I present to you the Circle Light.

Designed it to fit a single Corsair addressable LED strip, however it can accommodate pretty much any other LED strip.

The bracket allows for the light the be mounted to a 120mm fan.

Printed on Prusa Mini+

Print Instructions

Prints:

1x Base
1x Lid
1x Fan_Bracket (optional)

Settings:

No supports.
0.20mm Layer height.
0.4mm Nozzle

Non-printable parts:

2-4 M3 6mm bolts and nuts
A4 sheet of white paper
 

IMPORTANT:

Lids needs to be printed in white with a colour change to black at layer 4. Link below shows you how to do that in PrusaSlicer

https://help.prusa3d.com/en/article/color-change_1687/

Assembly Instructions

Cut a circle out of a white sheet of paper to place on the bottom of the Base.
Pull the LED strip through the hole on the wall and fit it around the wall. 
Put the Lid on. It should lock when rotated clockwise.

Make it your own!

The logos are extruded 0.8mm from the inside of the Lid. The diameter of the logo area is 99mm.