Tablet Mount - Qube 500
LauraSato
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-03-12 14:39:23
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Use any combination of the left and right (+0, +5, +10) corners to hold your tablet to your Qube 500 case.
Max tablet thickness is 8mm.
Use following combinations of mounts, depending on the width of your tablet:
+0 & +0 | +0 & +5 | +5 & +5 | +5 & +10 |
| 150 - 155 mm | 155 - 160 mm | 160 - 165 mm | 165 - 170 mm |
| 170 - 175 mm | 175 - 180 mm | 180 - 185 mm | 185 - 190 mm |
| 190 - 195 mm | 195 - 200 mm | 200 - 205 mm | 205 - 210 mm |
| 210 - 215 mm | 215 - 220 mm | 220 - 225 mm | 225 - 230 mm |
| 230 - 235 mm | 235 - 240 mm | 240 - 245 mm | 245 - 250 mm |
| 250 - 255 mm | 255 - 260 mm | 260 - 265 mm | 265 - 270 mm |
| 270 - 275 mm | 275 - 280 mm | 280 - 285 mm | 285 - 290 mm |
| 290 - 295 mm | 295 - 300 mm | 300 - 305 mm | 300 -310 mm |
(If your tablet is other sizes, hopefully you can see the pattern to see what combinations to use)
Example: If your tablet is 257 mm wide, you will use a “Right +0” and “Left +5" mount.
- Parts are pre-oriented for printability and strength
- Use supports on the hooks on the back
- Layer height 0.2 - 0.3mm
- 2 walls
- 10-30% infill
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC-BY-SA