This is a wall mount for the Dyson v7 Trigger vacuum, along with the attachments and charger it ships.  Care has been taken to make the mount ergonomic so that:

1. sharp edges are minimized in parts, and
2. the vacuum and its parts can be removed / stowed with ease by moving them up / down.

Attachment to the wall is accomplished via the use of Command strips, although you can change the models to use screw mounts if you want to (you just have to drive holes on the surfaces that mount to the wall).  If using Command strips, be sure your wall attachs firmly to Command strips; I recommend four for the vacuum, two for the charger, and four for the attachments.

The files in this model upload comprise:

• A FreeCAD 1.0 file, which you can freely modify (e.g. to add mounting holes for screws).
• The respective STL files for each part:
  • Charger holder.
  • Vacuum holder.
  • Attachments holder.
• A 3MF file for PrusaSlicer, configured by default to use a Prusa MK4 with 0.6 mm nozzle, and Esun PLA filament.
  • Nozzle and filament choice are not important.  Use whatever you want, as long as it isn't wobbly.
  • What is important is that your printer + filament combo is dimensionally accurate, to prevent improper fitment.
• A pre-sliced bgcode file with the settings expressed above.
  • Use your slicer of choice (I prefer PrusaSlicer) to change settings.