A tool to apply tape - with ease - to wrapping paper or boxes. 

An optional cutter (provided) can also be mounted, to cut the tape when done. However, this “cutter” more or less tears the tape, so if you want clean cuts you can always use a pair of scissors.

This works with mini tape rolls (18mm x 25mm).

Printing instructions

Walls count: 4

Layer height: 0.2

Infill: Cubic, 20%

Material: PETG or PLA

Assembly instructions

Assemble the device like in the picture below:

Usage instructions

1. Pull the tape between the tape holder and the front rolling wheel and then underneath the rolling wheel, like in the image below:

     2. Press the tape against the surface, with the front wheel, then pull the device backwards, still pressing down.

     3. At the end, cut the tape with the cutter ( if mounted ) by tilting the device forward until the front spike perforates the tape.

  See the attached animation in the gallery for the whole process.