Updates

• 2025-01-29
  • reduced profile, slimmer / better edge / faster print
  • recommend PETG but PLA works fine
• 2024-12-22
  • sharper
• 2024-12-14
  • Heard you guys liked scraping so I put some more scraper on your scraper, added additional edges to make the print more efficient
  • reduced size of the not-business-end to be a little smaller and sit better adjacentto other hanging bits
• 2024-12-08
  • updated geometry,
  • added thumb press location
  • added additional hanging configuration
  • previous files located under folder “Previous”
• 2024-12-07
  • Updated hook to be to spec
  • Reduced size/print time
  • Added separate .3mf print projects for X1C and FF ad5mpro devices
  • Added .step file
  • Added .stl of hook 

I designed this scraper while learning to use Fusion. It is a part assembly, and the 3mf files that use a combination of infills to hopefully give the scraper plenty of durability while still being a comfortable grip and weight to keep it snug on your wall.

On the older version the edge will “sharpen up” after the first few scrapes / the first walls peel off, the newer versions have altered geometry to avoid this.

Greatly Over-Engineered Wall System (GOEWS)  hanging board, available here https://makerworld.com/en/models/829453