This is a remix of the Sea Turtle Flexi by Lali3d.

The version which I have printed is a 68% scale version, which is available in the downloads section. There is also a 100% scale version in the downloads section as well.

I printed mine using the 0.25mm nozzle at 0.15mm layer height, but it can be printed on a 0.4mm nozzle as well.

Supports are not required. Please be careful when removing the model from the bed as you may break the joints. 

Here are the keyrings that I used: https://www.amazon.ca/Keychain-Making-Supplies-Keychains-Findings/dp/B09V55BSPK/ref=sr_1_16?crid=1YFTQ7KN8FPT9&dib=eyJ2IjoiMSJ9.obYsDpTrzUHRSfK81SZ1oAJ4utfcRG0yh5QDcWGsXlWLzDkmm9ox79PKOuCHczxWxOj-y9RUHxY3Z951O7fZtpGZ9mlzJrG6-HTKQ0M-bLMjjQgMdsfvbM7E0SCbWlSvbXvmpEdmzDb0SEYRckLInxB8-zRM79GRo_S2newLthE4s6TH4aY5IoWKmhiy_YChW0YkBftWkHgZ_2Eb7klNo_ITugMCsN4CTh0afMFupq-9hRuifUmGQ17vQtxPvK9L1HMDeVQiqcAg-LbCna0Kwlrr4Vx6GXHhL8D8OScgm5M.QhnKjC1kKCZ6VqG6FPzwMk4xrK8fPSwBOGAOCjTtBS8&dib_tag=se&keywords=keyring&qid=1756317208&sprefix=keyring%2Caps%2C157&sr=8-16&th=1