This is a remix of my original Electronics Enclosure for the HICTOP family of 3D printers. As part of this remix, I've made the enclosure taller to better accommodate the wiring connections that are made at the top of the board and modified the enclosure to be compatible with DarkDragonWing's cable chains used on his 3DPDK 3D Printer.

One difference from my use of the cable chains and DarkDragonWing's is that I have the Z chain oriented vertically instead of horizontally. I think it works nicely to allow the cables to come into the top of the enclosure while also keeping the cable chain out of the way.

In order to work with the cable chains I've provided mounts for the Y and Z chains that attach directly to the enclosure, as well as a mount for the other end of the Z chain to attach to DarkDragonWing's X carriage hub.

As before, the cover attaches to the case with M4x9 self-tapping screws. The cable chain mounts attach to the case with M3 screws.

HICTOP 3DP-11

Doesn't Matter

0.25 mm

100%

Enclosure:

https://cad.onshape.com/documents/58ade7f522115e0f6febe734/w/b709c30a8b32abd6d976fc5c/e/7dc0330b7997bae8c6d56edb

Cable Chain Adapters:

https://cad.onshape.com/documents/5907f5218eced3100f61ed72/w/03397eee26972a9a8f559bc4/e/9c71759c44bff192551bcd0d