This is a servo bracket for auto bed leveling, designed specifically for the Folger Tech Prusa i3. I made some minor modifications to MindRealm's great design to better suit my needs. It now integrates an X-endstop mount in addition to the original features. Also, a modified servo arm that should be more compatible with different servos, and a variant that places the Z probe switch on the opposite side of the arm (needed when the arm interferes with the X switch). Finally, the top piece of the bracket is designed to allow for a tighter fit to the extruder motor.

UPDATE 8/27/15

• V2 bracket includes a zip tie slot for securing the servo.
• New bracket design hides the X-endstop for a neater look.

UPDATE 8/28/15

• Added the endstopper for the X-endstop switch to bump into.

Printed with ABS, 0.24mm layers, and 75% infill.

I highly recommend using ABS! My first print with PLA dropped the servo due to high bed temperature, and the Z probe arm warped.

• Insulating the arm and using a zip tie around the servo should solve these issues with PLA.

UPDATE 8/27/15

• The "hidden" bracket design requires supports.