This case is based on the work from Tom Bric: https://github.com/TomBric/stratux-radar-display.

Work in progress:
I have to make a cover with a charging hole for the USB-C, and maybe an mounting option.

I used an e-paper without pinconnector to the PI because I wanted to be flexible in positioning.

Creality CR6SE

Doesn't Matter

Yes

0.2

15

The battery holder slides between the screen notch and the top in and is glued BEFORE you solder wires to it.

Raspberry Pi Zero

USB-C Li-Ion charger:
https://www.aliexpress.com/item/32649780468.html?spm=a2g0s.9042311.0.0.27424c4dXscENi

Pololu 5V Step-Up Voltage Regulator U1V11F5 (to keep voltage at 5volt):
https://www.pololu.com/product/2562/specs

E-Paper display (read the text from Tom):
https://www.waveshare.com/3.7inch-e-paper.htm

E-Paper Raspberry interface 13512, Universal e-Paper Raw Panel Driver HAT:
https://www.waveshare.com/e-paper-driver-hat.htm

18650 battery holder:
www.aliexpress.com/item/32900084819.html?spm=a2g0s.9042311.0.0.27424c4d9C7n8R

Micro switch 8.5mm:
https://www.aliexpress.com/item/4000234413676.html?spm=a2g0s.9042311.0.0.27424c4d6E9DrB

Power switch:
https://www.aliexpress.com/item/1005002816746500.html?spm=a2g0s.9042311.0.0.27424c4dPVVYnZ

Miscellaneous:
wires, screws, glue, hobby 2.54mm PCB, hot glue, Li-Ion battery, I use 3000mah, SD card.