Project: Pin Up.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 120x150mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 3mm and the Actual Depth is 2.8mm

Filaments Used:

PLA Smart Recycled Black Transmission Distance: 0.5

PLA Smart Recycled White Transmission Distance: 5.7

PLA Smart Recycled Red Transmission Distance: 4.4

This print uses 3 unique filaments

Swap Instructions:

Start with Black

At layer #5 (0.48mm) swap to Black

At layer #10 (0.88mm) swap to White

At layer #22 (1.84mm) swap to Red

At layer #31 (2.56mm) swap to White for the rest.