Summary

The cable duct that the author suggests is not easily available in the correct size, so I made this case instead.

I used some cheap AA battery contacts, available for next to nothing on Ebay, such as:

Or you could hack something up with some wire, but buying proper ones is dirt cheap anyway.

Print Settings

Printer Brand:

Wanhao

Printer:

Wanhao Duplicator i3 V2

Rafts:

Supports:

Resolution:

0.2mm

Infill:

30%

Notes:

Printed with ABS. No supports required.

Make sure the lid is printed with the lengthwise ribs facing up.

The parts have large circular discs at each end - these are only to help it attach to the bed, and should be cut off after printing.

Designed in OnShape, the project source:

Enlace original: Ver detalles

CC BY-SA