A wall mount for the Ekey Uno Fingerprint I designed. The door lock can be bought on amazon:

https://www.amazon.de/ekey-uno-Fingerprint-BLUETOOTH%C2%AE-T%C3%BCrschlossantrieb/dp/B07T725D7R/ref=sr\_1\_4?\_\_mk\_de\_DE=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=ekey+uno&qid=1596994999&sr=8-4

Holes for the screws which go into the wall and the one which hold the fingerprint scanner in place on the sides are not included, but feel free to add them to the attached Fusion 360 file. (Please don't judge my poor CAD skills) Also, if you want a tighter fit I would add about 3 more millimetres to the rounded edges on the inner side, but I haven't tested these.

I printed it laying flat on the front side on the textured PEI steel sheet from my Prusa Printer. This made the lines from the nozzle almost invisible. I used a thin layer of glue stink in combination with slow 7 mm/s printing speeds and high temperatures of 265 °C on the first layer to get a good stick.

Enjoy.

Print instructions

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: No

Supports: No

Resolution: 0.2

Infill: 100

Filament: Prusament PETG Signal White

Notes: textured PEI steel sheet, 15 mm Brim