This is a simple and inexpensive way of obtaining good quality video/sound from a model rocket in flight. The body tube is a standard approximately 24mm I.D. / 15/16". As with all model rockets, careful construction, balance, supervision, and experience is required for this project to be optimal. If you are not experienced determining model rocket aerodynamics and balance, do not use this modification.

Note- You must locate and drill two 4.00mm holes for accessing the switch buttons and a 1.00mm hole for observing the indicator light.

Thanks, Enjoy!

Monoprice

Maker Select Plus

Doesn't Matter

No

best

solid

I did not use any support structure and came out with a good make first time. The wall thickness of the print is approximately 1.5mm thru-out; making it rather light in weight.
Performance is very good with a "B" size engine; you will be amazed at what the camera captures at it's 45 degree downward angle.