Customized version of https://www.thingiverse.com/thing:193647

Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=193647

Customizer Parameters

type = nut
head_type = countersunk
drive_type = phillips
head_diameter = 7
head_height = 3
drive_diameter = 5
slot_width = 1
slot_depth = 2
texture = exclude
thread_outer_diameter = 4
thread_step = 0.7
step_shape_degrees = 45
thread_length = 7
countersink = 2
non_thread_length = 0
non_thread_diameter = 0
nut_type = normal
nut_diameter = 8
nut_height = 3
nut_thread_outer_diameter = 4
nut_thread_step = 0.7
nut_step_shape_degrees = 45
wing_ratio = 1
inner_diameter = 8
outer_diameter = 14
thickness = 2
facets = 6
socket_facets = 6
socket_depth = 3.5
resolution = 0.5

Update 20230627: Added .gcode file

Update 20250203: Added additional images, print settings and notes

Print Settings

• Printer:                Prusa i3 MK3S+
• Rafts:                    No
• Supports:           No
• Support type:    n/a
• Nozzle:                 0.4 mm
• Resolution:        0.1 mm
• Infill:                     15%
• Infill type:           Gyroid
• Filament:            PLA,PETG*

Printed in: Spool3D Gray PLA, Polymaker PolyLite Yellow PETG

Notes:
Print as shown. Tolerances are very tight and I would recommend after printing to use a metal M4 boltt to clean the thread, especially if the nut will be used with a 3D printed bolt.

* Note that, if printed in PETG and using with bolt also printed in PETG, they’ll bind much more than if printed in PLA, so I would recommend slightly reducing the size of the bolt on both the X and Y axis to 99% and enlarging the nut on both the X and Y axis to 101%.