Heltec Meshtastic case
tech_hobby
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-03-21 03:35:37
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Update 11/27/21 - Added a V2 body and buttons. Made the buttons separate from the body. Better for durability. Also leaves you with the option of discarding the reset button if needed.
I got these cheap Heltec boards to play around with meshtastic. Don't know what meshtastic is? Check it out at https://meshtastic.org/
I wanted to make these as compact as possible. I designed this case. It has just enough room for the board and a 1000mAh battery while not pinching the antenna. Also a spot for a switch. I ground the switch down on a grinder so its almost flush with the case to keep from turning it on/off by accident.
The switch I used can be found here. https://www.amazon.com/gp/product/B07Y88C1Q6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
I also used m3x22mm bolts.
Print Settings
Printer:
hypercube
Notes:
I wanted these to be strong. They are printed with 3 walls and 4 top/bottom layers.
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC-BY