Easy to print housing for Estlcam remote. Same orientation as the original remote, size was reduced to minimize print duration. Cable outlet can be mounted on the top or the bottom. Screws could be whether M3 with threaded holes or self tapping flat head screws. See below list for the correct components to fit the housing.

Partlist:
Rotary encoder 60mm (http://de.aliexpress.com/item/32852966342.html)
Rotary switch (http://de.aliexpress.com/item/32793971518.html)
Poti 2pcs 10k (http://de.aliexpress.com/item/32948875673.html)
Button 8pcs 5V (http://de.aliexpress.com/item/32819895241.html)
Optional wire fixing (http://de.aliexpress.com/item/32981045114.html)
M3 flathead screws

Robo 3D

R1 ABS + PLA Model

No

No

0.3

30%