Summary

Stand for SpotMicroESP32.

Required Printed Parts:

• Stand.stl (2x)
• StandConnector.stl (2x)
• StandFoot.stl (4x)

Required OtherParts:

• M3 nuts (8x)
• M3 screw length 12 mm (8x)

Recommended Materials:

• PLA (30%): Stand.stl, StandConnector.stl
• Ninjaflex (10%): StandFoot.stl
• Ninjaflex (10%): StandAntiSlip.stl

Changes 5 Jan 2021:

• added optional StandAntiSlip.stl to avoid that robot slides in stand while testing
• added optional Stand_TopHalf.stl and Stand_BottomHalf.stl which should be glued together. These parts can be used if the stand.stl does not fit the printbed