I printed this in a big way from abs, then i was sanding and painting. The 3mf file reflects these settings.
But i also added the normal stl.

Pro tip:

 If you do it with lighting infill and 4 permiters, it will remain just as strong, but you will save material and time, in some cases not a little. And if you leave a bag or hole at the bottom, you can fill it to make it heavy.

Painting method:
1. I filled in the uglier parts around the support at the bottom with plasticine glue.
2. I painting it out with an car filler.
3. I sanded it as smooth as possible while wet.
4. Painting with stone texture spray
5. Painting matt color
6. Again painting with stone texture spray

Print Settings

• Material: Gembird - Black ABS
• Nozzle: 0.4mm
• Support: Coat: Yes (Snug)