This is a modular hobby servo TWISTING joint assembly. It is part of the Tiny_CNC_Collection of parts designed to facilitate entry into robot building fun!

All parts print without supports or post processing! See Photos for assembly directions.

*All information regarding this project is on this page:
http://engineerdog.com/tinycnc
.
Required Hardware: MG90S Servo: https://www.amazon.com/RioRand-MG90S-Metal-Geared-Helicopter/dp/B00M8SR0ZK/ref=as_li_ss_tl?ie=UTF8&qid=1533544090&sr=8-3&keywords=mg90+servo&linkCode=sl1&tag=engin09-20&linkId=bab41ca93adb7ed7bc5a44287879d527&language=en_US
Recommended Material: https://www.amazon.com/RioRand-MG90S-Metal-Geared-Helicopter/dp/B00M8SR0ZK/ref=as_li_ss_tl?ie=UTF8&qid=1533544090&sr=8-3&keywords=mg90+servo&linkCode=sl1&tag=engin09-20&linkId=bab41ca93adb7ed7bc5a44287879d527&language=en_US
Alternative Hardware: SG90 Servo: https://www.amazon.com/RioRand-MG90S-Metal-Geared-Helicopter/dp/B00M8SR0ZK/ref=as_li_ss_tl?ie=UTF8&qid=1533544090&sr=8-3&keywords=mg90+servo&linkCode=sl1&tag=engin09-20&linkId=bab41ca93adb7ed7bc5a44287879d527&language=en_US
.
Can be printed in any material as long as all parts are the same material.
.
.
.
.
.

*Note 1: Included are STEP files so you can further modify these to your needs. Please enjoy these files and use them as you wish while respecting the sharing license.
**Note 2: If you do print these out snap a pic and share your make! I'd love to see how these designs are being put to use.

Video Demo @ 5min-36sec: https://youtu.be/EGnOKyPqEH8?list=PLxT-reigvGs1LH1x2Emq-B8s_OtdUZwxE&t=336

Doesn't Matter

No

0.2mm

10

PLEASE NOTE PRINT SETTINGS ARE CRITICAL TO ACHIEVE STATED PERFORMANCE.rnPrint with 3 perimeters all sides top & bottom. (0.4mm nozzle dia)rnParts must be printed in the orientation they appear when you load them!