Hi,

this is an insert for the Busch Jaeger Duro 2000 switch series.

It clips directly on the frame and has no additional fasteners.

So, it is primarily designed to cover empty slots in a multi frame.

It can also be used if you want to create your own DIY inserts.

I also included an insert with centered 10mm hole since I used the insert to route a cable through the hole.

Please be aware that you are not supposed to tamper with your electric’s installation on your own, so be carful when you are using this design.

Print Settings

Printer:

Rafts: 

No

Supports:

Yes

Resolution: 

0,15

Infill:

50%

Filament:

Sunlu PLA but might be better with PETG for the flex

Ivory white How I Designed This ===================

FreeCAD

model included for your own designs

Category: DIY