Generate a leveling model for your Printer
Carol Lee
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2015-11-10 01:57:29
0
0
000Descripción
Fuente del modelo
Comentarios(0)
Summary
This is just a customizable model that lets you fit it to the size of your print bed. I find it useful for doing a quick check to see that the bed is level, and fillament is feeding ok.
The STL file in this project is for the Flashforge Creator Dual only. Use the customizer to make one specifically for your printer.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.5
Notes:
No shells either.
This should put down one layer of half millimeter print.
The model will probably not be centered on your build plate. You will need to move it manually. RepG has a button for that.
Post-Printing
After it cools a little bit, it scraps off easily
This seems to be working pretty good for me. I have a Flash Forge Creator Dual. The bed is 225 x 145.
The cross hairs show that my actual center is about 1.5 MM to the left.
With this I have a way to detect that issue.
I would be interested in hearing about any issues you have.
I also love suggestions. What can I add or subtract to make it more useful
Fuente del modelo
Enlace original: Ver detalles
CC BY