Summary

It's summer time! Make the fun game of beersbee for around $10 with printed tops and a couple parts from your local hardware store. Pieces collapse for easy storage and travel.

Parts Required:
2x Printed Beersbee toppers
1x Schedule 40 PVC Conduit – 1/2 In ($4.5 CAD) https://www.homedepot.ca/en/home/p.schedule-40-pvc-conduit--12-in.1000101192.html
2x Schedule 40 PVC Female Adapter – 1/2 Inch ($0.59CAD)
https://www.homedepot.ca/en/home/p.schedule-40-pvc-female-adapter--12-inch.1000100870.html
2x Schedule 40 PVC Male Terminal Adapter – 1/2 Inch ($0.59CAD)
https://www.homedepot.ca/en/home/p.schedule-40-pvc-male-terminal-adapter--12-inch.1000100884.html
1x piece of rebar OR 2x Nail Spikes, test fit the nail head to the PVC in store ($1.05-5.36 CAD)
https://www.homedepot.ca/en/home/p.10m-epoxy-rebar---3-feet.1000115267.html
https://www.homedepot.ca/en/home/p.12spiral-hot-galv-50lb.1000683264.html

Instructions:
Cut the PVC pipe into four 2' sections (61cm)
Alternately, cut them into two 4' sections if you don't want to make the collapsible
Use ABS glue to attach the female couplers to two pieces and the two male couplers to the other two
Attach the beersbee toppers to the empty end of either the male or female sections (glue them on if the fit is loose)
If using rebar, cut the rebar in 12"/30cm pieces with an angled tip
Test fit the rebar spike and wrap a couple sections of electrical tape around it to provide a snug, but easily attachable fit
If using nail spikes, make two wraps of electrical tape similar to the rebar. However, you will need many more wraps to get a good fit to the inside of the PVC

Frisbee and beer not included. Please beersbee responsibly. ;)