Bolt on enclosure for the Geeetech G2S.

Stepper motor assembly needs to be removed in order for the bottom plates to be installed, that just bolt on using the vertical smooth rod screws.

need to print
3x bottom plates (one for each corner)
3x top plates
12x posts (4 for each corner)
2x bottom lips (to join the bottom plates together (one isnt required for the front
1x top tray (fan housing for exhaust port on the top, and doubles as a handy storage tray)

parts required
3mm Acrylic or PVC plate

plates just slide in from the top creating a sealed chamber.

Note this is a work in progress, more updates and pictures to come

note these need to be rotated 90 degrees (on X axis) and printed without any supports or rafts

Geeetech G2S

No

No

0.2mm

15%

its a good idea to heat the posts up a little bit on the bottom when installing them as tolerances are tight