Raspberry PI 4 SSR DIN mount
bumblesoil
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2025-12-15 14:11:02
0
0
000Descripción
Fuente del modelo
Comentarios(0)
Adapter to mount a Raspberry PI 4 onto a standard solid state relay DIN rail adapter, readily available on Aliexpress and Amazon (search for SSR DIN rail).
The spring in the typical 3D printed clips used with other PI DIN rail mounts can be fiddly and often breaks when unmounting from a DIN rail. The metal DIN rail adapter doesn't break, and also provides a much sturdier grip on the DIN rail.
The biggest drawback is a 3-4mm higher installation height compared with the printed clips.
The adapter does not have cutouts for 2.5mm nuts, but a STEP file is provided, and it should be easy enough to adapt.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2
Infill:
42%
Filament:
Prusament PC CF Blend Black
Notes:
The version shown in the images was printed in Prusament PC CF blend, but PLA and PETG should work equally well. Print vertical shells with 4 perimeters for extra stiffness. Infill is not important.
Fuente del modelo
Enlace original: Ver detalles
CC-BY-SA