This night lamp from the minecraft game consists of several parts and most of the parts are colorprints. Part 1 contains up to 7 colors and also contains all the colors needed to print this model. You do not need a multimaterial upgrade for this print. Only the colorprint function is enough. All g-cody are prepared for 0.4 mm nozzle and 0.15 mm layer height. The construction instructions are attached to the pictures. In addition to the filament, you still need: a small piece of conductive sheet metal, you can also use an ordinary can, a thin cable, a 3V battery CR2025, a light chain of at least 20 diodes or more depending on how bright you want it to be, glue, a soldering gun and tin. The lamp is turned on in the same way as in the minecraft game. when the model reaches at least 30 downloads and 3 likes, I will make another equally detailed block model from the minecraft game. :)