My wife wanted to have a new way that matches her aesthetic to show off some of her crystals. Being the good husband I am I made her this. Each shelf has a little lip so nothing falls out. It is pretty big so I had to scale it down to 97% and split it into 2 parts to fit in my Ankermake M5. When I was making it I meant to make the middle shelf thicker for pegs to keep it together but I forgot, so I sliced it in half and just super glued the pieces together. It holds really well, and my wife loves the look! It's not perfect, but it's my first model I made all on my own and I don't think it turned out too bad! The web looks decent from a distance, but I don't like how it turned out so I did not include it.

Supports were only needed in order for the lip to print correctly since its a 90 degree overhang. Should print easily on any printer that can handle the size

UPDATE: Updated Coffin Files added curved lip so you can print with no supports. Also added lip on bottom shelf

Didn't change many settings to print

Layer Height: .2

Infill: 10%

Supports: Yes , Everywhere