Summary

I designed this exclusively for hold an iPhone 6 or 7 attached to the Thrustmaster Open Wheel steering wheel, you can try another device with same dimmension to fix in I f you want to try too. The iPhone 7 measures 138.3 mm (height) x 67.1 mm (width) x 7.1 mm (depth).
Printed in PLA-CArbon Fiber with 0.4 mm. For better accuracy 0.2mm and your recommended PLA settings to print for.
Model is x1 Left side, so you have to mirrored it for get the x1 Right side, so you can print both at the same time.
I designed it for 3D printed in horizontal way the most flat shape is over the bed, if you add an estructure for support will be better for the rounded shape attached to the base.
Extras:
x2 slim plastic straps. To attach both HUD supports to the to Open Wheel.
x1 rubber band: For fix the cellphone to the 3D printed supporters. If you use slim rubber vand I recommend use 2, for a major secure of the cellpohne attached to the wheel.
IMPORTANT: Check the rubber band is tiht attached to both HUD supports are applying pressure to the device.
You can put the cellphone/device before start the wheel, when the wheel calibrates itself, it will do some turnings, the cellphone attached will be fine.
I recommend use a secondary cellphone/device for this HUD function.