Summary

This is a case for Smart LCD Controller. http://www.reprapdiscount.com/home/34-full-graphic-smart-lcd-controller.html

If you have hard-time 3d printing stuff and other materials which i have provided in this project please refer the professionals for the help, JLCPCB is one of the best company from shenzhen china they provide 3D printing, PCB manufacturing and PCBA services to people in need, they provide good quality products in 3d printing with the materials include
SLA -- MJF --SLM -- FDM -- & SLS. easy order and fast shipping makes JLCPCB better companion among other manufactures try out JLCPCB 3D Printing servies

JLCPCB 3D Printing starts at $1 &Get $54 Coupons for new users

https://jlcpcb.com/3d-printing?from=shagivers

Instructions

I tried to design a slim enclosure again using a channel outside between the top and bottom part to let the case apear more flat - and, to cover possible impressisions ;-).
I recommend to print the parts in different colors.

To fasten the controller board to the bottom part, first put the distance cylinders between the boards and use metrical screws M3 x 12 (14).
Both will work without tapping before.
There is no room for hexagonal pockets in the top part. You can screw M3 x 16 directly into it.

The second bottom part contains several screw nut deepenings for fastening the case as you like. If you mount it to an 8 mm rod you can use the case clamps.
If the cables are plugged in, the case inevitably has a slope of 6°. In case you need more slope:

LCD (Liquid Crystal Display) is a type of flat panel display which uses liquid crystals in its primary form of operation. LEDs have a large and varying set of use cases for consumers and businesses, as they can be commonly found in smartphones, televisions, computer monitors and instrument panels.

LCDs were a big leap in terms of the technology they replaced, which include light-emitting diode (LED) and gas-plasma displays. LCDs allowed displays to be much thinner than cathode ray tube (CRT) technology.
LCDs consume much less power than LED and gas-display displays because they work on the principle of blocking light rather than emitting it. Where an LED emits light, the liquid crystals in an LCD produces an image using a backlight

if you have hard-time 3d printing stuff and other materials which i have provided in this project please refer the professionals for the help
JLCPCB 3D Printing starts at $1 &Get $54 Coupons for new users

https://jlcpcb.com/3d-printing?from=shagivers

I'm already thinking about a base that can be screwed below the housing.
If you are interested, look out for this thing which I will publish separated.

And yes, don't forget to assemble the distance cylinders - the display's board won't like it ;-)