I recently got into the hobby of silk screening. So I designed this holder/rack to mount onto a wall. You can snap the silk screen into the holder and it will support it so it can dry or for storage to keep it off of your workspace.

This was designed to fit a silk screen from www.silkscreeningsupplies.com so adjustments may need to be made for it to fit other screens. The fit is tight, requiring a small amount of pressure to snap the screen in place as well as to remove it.

This came out very sturdy with the angled supports.

1] Print one per screen for small screens; maybe two per screen for large screens (or if you prefer more support). I used 25% infill every two layers.
2] Mount to your wall or stud using adequate screws and washers. I use washers to spread out the pressure from the screw so the plastic does not get crushed.