Summary

-This is a 'golf divot tool' bit to replace the key from my 'switchblade key'

All other required files can be found in the 'remix sources' widget
!The design has been updated with a new rounded case!

--It may require some wiggling to get everything into place but it all fits.
--The latch requires some adjustments (bending) after installation to prevent it from jamming or stopping it before it latches open/close.

-there is more friction with the divot tool than the key alternative-

This was designed for a 0.4mm nozzle
Layer height : 0.2mm
Support : No