Compact and simple Orange Pi Zero enclosure based on Orange Pi Zero Case by Farrukh Pitafi designed from scratch using FreeCAD.

Source files: https://github.com/xoan/3D-parts/tree/master/orange-pi-zero-case

FoldaRap 1.1

Doesn't Matter

No

250 µm

25%

• Ø3 mm. and Ø5 mm. drill bits
• 4 x DIN-7981 2.9 x 9.5 mm. (13 mm. long works too)

1. Drill the holes in orangepi-zero-case-bottom.stl with the Ø3 mm. drill bit and the antenna hole in orangepi-zero-case-top.stl with the Ø5 mm. drill bit.
2. Insert the antenna through the hole and assembly the two parts with the board inside taking care with the antenna wire.