Summary

360mm outer diameter. Use 2 pieces of bearings 608 and 8mm threaded rod as axis. Main costruction part are screwed with m4 threaded rods and M4 nuts. Small holes in side works as filament clip and after inserting 100mm nylon filament pieces as spool "brake". Can hold up to 4kg material (with 70% filling).

Print Settings

Printer:

Rebel II ozmod

Rafts:

Supports:

Resolution:

0.25

Infill:

20%-100%

Notes:

Can by printed from any construction material. I personally preffer ABS.

Post-Printing

Just remove (cut off) small technological pads from 12pcs printed parts.

How I Designed This

Its new version of previous mounted spool with M4, instead m8 threaded rods.
BOM:
2x ... stred civky
12x ... civka obruc
12x ... M4 x 115mm threaded rod
12x ... M4 x 150mm threaded rod
1x ... M8 x 300mm threaded rod
48x ... M4 nut
36x ... M4 nylock nut
4x ... M8 nut
2x ... 608 bearing
(optionally 12x 100mm nylon filament for spool break)

Etiquetas

montado

Fuente del modelo

Enlace original: Ver detalles

CC BY