Summary

This is a small fume extractor to be used when soldering. I wanted a small fume extractor that was quite.

Bill of Materials:
4x M3x16 screws
4x M3 nuts
1x 40mm fan
1x SPST toggle switch
1x 12v Power supply
1x Carbon Filter

A small amount of soldering is required to connect the 12v power supply with the 40mm fan and SPST switch.

Use double sided tape or a small amount of glue to adhere the carbon filter to one of the sliding panels.

In the future I may scale this model up to accommodate an 80mm fan

Print Settings

Printer Brand:

RepRap

Printer:

MakerFarm i3V 10

Rafts:

Doesn't Matter

Supports:

Doesn't Matter

Resolution:

0.25mm or less

Infill:

20-25%

Notes:

Total print time for this fume extractor is about 4 hours.

Enlace original: Ver detalles

CC BY