I created this case as I wasn't able to find a minimalistic case which didn't add a significant amount of weight or size to the iphone 13 pro. I personally think its pointless to pay $1000+ for a phone only to make it look like crap with a bulky case. At the same time, I don't like spending thousands a year to keep buying new phones. This model is the result of this.

Due to how thin the side walls are on this case, you will need to ensure that you do everything to promote layer adhesion. 100% of the prints that failed on me while developing this were due to poor layer adhesion. With this being said, you'll also want to use the strongest filament possible on your printer. I don't recommend PLA, as its too rigid and makes it very difficult to get the phone into the case. PETG seems to work well provided you have good layer adhesion. I ended up using glass filled nylon for maximum impact resistance even with how thin the case is.

Obviously I'm not responsible for any damage that your phone incurs while using this case.

MakerBot

MakerBot METHOD X

No

No

0.15

100

Layer adhesion is the most important aspect to printing this case. Print slower than normal and slightly higher temp (5-10c) for max layer adhesion. Supports are not required, a raft is preferable if you'd like the outer side of the case to be as aesthetically pleasing as possible. Also, I recommend using 3-4 shells.