Electronic Load Case
shirley2005
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2018-02-10 19:36:06
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Summary
This electronic load is very common (and cheap!) And allows you to measure, simulate and test loads electronically with free Windows software up to 21V and 4A. See what this device can do here: https://www.youtube.com/watch?v=VDCShH-zj0U&t=516s
USB connector cases: https://www.thingiverse.com/thing:2789966
I do not like the open design, because there are cables lying around to the fan and I always have to remember which connector is for what. That's why I designed a case. You can use the top and bottom casings or just one of them. Both parts are available with or without support.
Enjoy!
Print Settings
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2-0.3mm
Infill:
25%
Post-Printing
Remove the original plexi plate to easier mount the top case. Use 2mm longer M3 screws for the bottom case and install with the original plate (see picture).
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC BY