This is a set of connectible spacers that hold wine bottles a certain distance apart. The provided STL accommodates bottle widths of 10cm, perfect for bubbly, but this is easily changeable via the bottle_spacing parameter in the SCAD source file.

I created these because the pre-formed spacings in my wine fridge aren't the right size for non-Bordeaux bottles.

Overhangs are at most 45 degree, so should be easy to print.

No

No

0.3mm

15%

I printed in ABS without cooling (to minimise warping). Infill doesn't have to be very high. Even at 15%, the parts were strong enough. Slight warping still occurred but didn't matter once bottles were loaded onto them.

The parts hold together with friction. If you find they are too tight or loose, adjust the connector_cradle_tol parameter in the SCAD source file.