This is modular system for making a shelfs.
Main part is this connector.
It allows you to connect plates of cardboard or some other material, glass, plexiglass etc.
Of course, everything is customizable. We reccomend to remember or write down dimensions for printing other parts. For example - door hinge part need same dimensions as connector to fit together
More from this system:

• door hinge http://www.thingiverse.com/thing:1693252
• door handle http://www.thingiverse.com/thing:1693253

I have added a set of connectors for desks with thickness 5mm.

Here are some links to our website and social media where you can see more of our creations.

You can also support us directly here on Thingiverse by sending us a tip so we can make more models.

This fan-made model was brought to life by 3Demon. We are a group of modeling and 3d printing enthusiasts based in Prague, Czech Republic.

Happy Printing :-)
3Demon

RepRap

Prusa i3, Rebelix,

Doesn't Matter

No

0.252

• printed parts
• desks made of cardboard, glass, plexiglass etc
• pieces of filament to secure desks
• lighter or source of high temperatures to heat pieces of filament securing desks

• Think about a shape you want to build
• Print connectors and other parts customized just for your thickness of desks, and make sure they're strong enought to hold them (for glass desk you should rather use thicker connectors, etc.)
• Put desks in connecotrs and other parts
• Use lighter to make nail shape using piece of filament long enought to go through the desk and connector
• Put nail shaped pieces into every hole in construction.

You are done! :-)

We were thinking about some shelf or a storage system that we need in Makerslab. At first we wanted make fully printable modular shelves. But we found it hard to make piece which would easily print and do not waste material... So here is system using not only printed parts. mainly it uses cardboards, because design in Makerslab and Paralelní polis is made out of carboard.