Pokemon Mewtwo attack
TimidMane4
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-07-31 14:07:11
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 92.38x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.7
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA Smart Recycled Violet Transmission Distance: 1.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #10 (0.88mm) swap to Blue
At layer #11 (0.96mm) swap to White
At layer #18 (1.52mm) swap to Black
At layer #20 (1.68mm) swap to White
At layer #21 (1.76mm) swap to Violet
At layer #23 (1.92mm) swap to White
At layer #28 (2.32mm) swap to Black
At layer #29 (2.4mm) swap to White for the rest.
The Model is 92.38x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 3.1mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA Smart Recycled White Transmission Distance: 5.7
PLA Smart Recycled Blue Transmission Distance: 2.2
PLA Smart Recycled Violet Transmission Distance: 1.2
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to White
At layer #10 (0.88mm) swap to Blue
At layer #11 (0.96mm) swap to White
At layer #18 (1.52mm) swap to Black
At layer #20 (1.68mm) swap to White
At layer #21 (1.76mm) swap to Violet
At layer #23 (1.92mm) swap to White
At layer #28 (2.32mm) swap to Black
At layer #29 (2.4mm) swap to White for the rest.
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC BY