Cute view orange cat
Zoe Steele
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-06-30 08:34:17
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.7mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Orange Transmission Distance: 5.7
PLA Smart Recycled Green Transmission Distance: 6.5
PLA Smart Recycled Silver/Gray Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #20 (1.68mm) swap to Green
At layer #26 (2.16mm) swap to Silver/Gray
At layer #27 (2.24mm) swap to White for the rest.
The Model is 160x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3mm and the Actual Depth is 2.7mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Orange Transmission Distance: 5.7
PLA Smart Recycled Green Transmission Distance: 6.5
PLA Smart Recycled Silver/Gray Transmission Distance: 0.5
PLA PolyLite White Transmission Distance: 5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Red
At layer #13 (1.12mm) swap to Orange
At layer #20 (1.68mm) swap to Green
At layer #26 (2.16mm) swap to Silver/Gray
At layer #27 (2.24mm) swap to White for the rest.
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC BY