Wanted Usopp One Piece
rosyflint7
Encuentre similares con IA
Perfil de impresión(0)
Archivo de modelo(0)
0
0
0
Publicado:2026-08-14 00:35:17
0
0
000Descripción
Etiquetas
Fuente del modelo
Comentarios(0)
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 137.34x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.4mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA smartfil marron Transmission Distance: 5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled White Transmission Distance: 5.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to marron
At layer #16 (1.36mm) swap to Red
At layer #17 (1.44mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.
The Model is 137.34x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.5mm and the Actual Depth is 2.4mm
Filaments Used:
PLA Smart Recycled Black Transmission Distance: 0.5
PLA smartfil marron Transmission Distance: 5
PLA Smart Recycled Red Transmission Distance: 4.4
PLA Smart Recycled Yellow Transmission Distance: 9.3
PLA Smart Recycled White Transmission Distance: 5.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to marron
At layer #16 (1.36mm) swap to Red
At layer #17 (1.44mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.
Etiquetas
Fuente del modelo
Enlace original: Ver detalles
CC BY