Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 60x200mm in size
You may print at higher layer heights below the Min Depth of 1.3mm
The Max Depth is 3mm and the Actual Depth is 3.1mm

Filaments Used:
    PLA BambuLab Matte Charcoal Transmission Distance: 0.6
    PLA BambuLab Matte Scarlet Red Transmission Distance: 2
    PLA BambuLab Matte Ash Gray Transmission Distance: 1.5
    PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 4 unique filaments

Swap Instructions:
    Start with Charcoal
    At layer #21 (1.76mm) swap to Scarlet Red
    At layer #26 (2.16mm) swap to Ash Gray
    At layer #30 (2.48mm) swap to Ivory White for the rest.